Check Stainless Steel Hot Rolled Plate and Sheet Price list in Mumbai, India
Hot Rolled Plates / Hot Rolled Plate Sizes / Hot Rolled Plate Price / Stainless Steel Hot Rolled Plate/ Stainless Steel Hot Rolled Coil / Hot Rolled Stainless Steel Surface Finish / Hot Rolled Stainless Steel Sheet In Coil / Hot Rolled Stainless Steel Coil Price / Hot Rolled Steel Plate Grades .
To manufacture the Hot Rolled Stainless Steel Coil, the steel is basically rolled pressed at an elevated temperature, more than 927 degrees C. It is because this is the recrystallization temperature for most of the steel. This procedure helps in generating different types of products which come with a high workability.
The stainless steel hot rolled coil is mostly used for applications where any precise shape or tolerance is not necessary. They are used in different types of structural equipment, agricultural equipment, etc. These coils are available in various grades which offer corrosion and heat resistance to a varied extent.
To manufacture HR Coil, the manufacturers have to go through less amount of processing which makes the whole procedure quite cheaper. As the hot rolled steel is cooled down at a room temperature, hence they are normalized which means they do not have any internal stresses which arises due to the work-hardening procedures.
The HR Steel Coils are primarily used for applications wherein overall dimensional tolerance is not as important as the material strength. Also, it should not be used for applications where the surface finishes might be a concern. Clients can also get HR Slit Coil which comes with a good design and can be used for different services. They come at a reasonable rate and are perfect for various usages. They are primarily used in the automobile industry, and also the machine making workshops.
Depending on specific requirements, clients can request customization of the products in terms of shape, size, and dimensions. Their surface finishes are also customizable and the prices would vary according to that.
Table of Contant
Hot Rolled Coils Sizes
Hot Rolled Plates Sizes
Hot Rolled Sheet Sizes
Hot Rolled Coils, Sheets & Plates (Hot Rolled Sheet Sizes)
Hot Rolled Plate Price | Hot Rolled Steel Plate, 1-2 Mm And 2-15 Mm, Rs 48000 metric ton |
Hot Rolled Coil Prices In India | Rs 44,500 to 49,500 Metric Ton |
Hot Rolled Sheet Price | Rs 48 kilogram to 65 Per Kg |
Usage/Application: | Oil &, Gas Industry |
Coil Weight | 8 -17 Tonnes |
Inner Diameter of Coils | 760 mm |
Thickness |
1.2 - 25.4mm |
Width |
900-2100 mm |
Grades |
Re-rolling/ Drawing Grades, Tube and Pipe/ Forming Grades, Structural/ Medium Tensile Tube/ Forming Grades, LPG/ Low Pressure Vessel Grades / HSLA Grades / Medium Carbon Grades / Weather Resistance Grades / Line Pipe Grades / Chequered Plates |
Hot Rolled Cut to Length Sheets
Thickness |
1.2 - 25.4mm |
Width |
900-2050 mm |
Length |
1000 – 13000 mm |
Hot Rolled Pickled & Oiled (HRPO)
Thickness |
1.6 – 6.0mm |
Width |
1650mm |
Hot Rolled Skin Pass Pickled & Oiled (HRSPO)
Thickness |
1.6 – 2.6mm |
Width |
1650mm |
Quick Enquiry
Are You Looking To Buy Our Stainless Steel Products Click Below
Contact Sanghvi Enterprise today for a best offer & competitive quotation Of Stainless Steel Pipe & Tube
Call: +91-22-2387 9711, 6639 4261, 6743 6461
Email: info@sanghvienterprise.com