Stainless Steel Plate Standard Size & SS Plate Gauge Thickness Tolerance Chart

Stainless Steel Plates Manufacturers In India - Ss Sheet Gauge in Mm, Stainless Steel Plate Thickness in India And Weight Chart Metric, Stainless Steel Plate Flatness Tolerance Chart

Check Stainless Plate Sizes Philippines/ Malaysia / Australia, Stainless Steel Plate Gauge Chart, Stainless Steel 304/304L Plates Sizes, Stainless Steel Plate Mill Plate: Grades Thicknesses and Widths, Stainless Steel Plate Specifications, Stainless Steel Plate Tolerances.

 

Table of Contant

Stainless Plate Sizes
Stainless Steel Plate Gauge Chart
Stainless Steel 304/304L Plates Sizes
Stainless Steel Plate Mill Plate: Grades, Thicknesses and Widths
Stainless Steel Plate Specifications
Stainless Steel Plate Tolerances


Many Steel stockholders generally stock a range of Stainless Steel standard size plates as this increases the availability and likelihood that you will able to find the Stainless Steel Plate that you need. To maximise the benefit of purchasing Stainless Steel Plate from a stockholder it is best to design to use stock plates. That is if you know what dimensions are available you can minimise wastage and cutting in your design.

It is also beneficial to consider the dimensions that a stockholder works in. This is because there is not an exact correlation between metric and imperial units and there can easily be a 10% difference in the closest Stainless Steel Plate sizes to your dimensions leading to increased wastage.

STAINLESS STEEL PLATE SIZES

Generally availablein Grades 3CR12, T/304 & Grade T/316; in a wide variety of finishes.

2000 X 1000 X 3MM STAINLESS PLATE
2500 X 1250 X 3MM STAINLESS PLATE
3000 X 1500 X 3MM STAINLESS PLATE
4000 X 2000 X 3MM STAINLESS PLATE
2000 X 1000 X 4MM STAINLESS PLATE
2500 X 1250 X 4MM STAINLESS PLATE
3000 X 1500 X 4MM STAINLESS PLATE
4000 X 2000 X 4MM STAINLESS PLATE
2000 X 1000 X 5MM STAINLESS PLATE
2500 X 1250 X 5MM STAINLESS PLATE
3000 X 1500 X 5MM STAINLESS PLATE
2000 X 1000 X 6MM STAINLESS PLATE
2500 X 1250 X 6MM STAINLESS PLATE
3000 X 1500 X 6MM STAINLESS PLATE
4000 X 2000 X 6MM STAINLESS PLATE
2000 X 1000 X 8MM STAINLESS PLATE
2500 X 1250 X 8MM STAINLESS PLATE
3000 X 1500 X 8MM STAINLESS PLATE
2000 X 2000 X 10MM STAINLESS PLATE
2500 X 1250 X 10MM STAINLESS PLATE
3000 X 1500 X 10MM STAINLESS PLATE

Stainless Steel Plate Gauge Chart*

Gauge
Number
Inches MM
8 .17187 4.365
9 .15625 3.968
10 .14062 3.571
11 .125 3.175
12 .10937 2.778
14 .07812 1.984
16 .0625 1.587
18 .050 1.270
20 .0375 .9525
22 .03125 .7937
24 .025 .635
26 .01875 .476
28 .01562 .396
30 .0125 .3175

Stainless Steel 304/304L Plates Sizes

Steel grades AISI304/304L (1.4301/1.4307)
Production Hot-rolled
Standard ASTM A240/A480
Thickness Standard: 3.0mm-30.0mm
Over 30.0mm on request
Width 1000mm, 1250mm, 1500mm, 2000mm, Other sizes on request
Package weight 1.0-4.0 tonnes
Application Medical equipment, Food industry, Construction material, Kitchen utensils, BBQ grill, Building construction, Electric equipment,

Stainless Steel Plate Mill Plate: Stainless Steel Grades, Thicknesses and Widths

Thickness Range of Stainless Plate

3/16″ Thru 6″ Thick Stainless Steel Plate

Common Widths of Stainless Plate Coil

48″ Wide – 60″ Wide – 72″ Wide – 78.75″ (2 Meter) wide – 84″ wide – 96″ wide – 120″ wide & other widths upon customer request.

300 Series Stainless Steel Grades

302 – 303 – 304 – 304L – 304L Polished – 304H – 309 – 309S – 309H – 310 – 310S – 310H – 316L – 316L Polished – 317L – 317LMN – 321 – 321H – 330 – 347 347H

400 Series Stainless Steel Grades

405 – 410 – 410S – 416 – 420 – 440C

Duplex Stainless Steel Grades

LDX 2101 – Duplex 2205 – Duplex 2507

Precipitation Hardening Grades

17-4PH – 17-4 H1150 (per customer request) – 15-5PH

Nickel Alloy Grades

Alloy 20 – Alloy 200 – Alloy 400 – Alloy 600 – Alloy 800 – Alloy 800HT – Alloy C-276 (nickel grades may require lead time)

Value Added Resources

The following value added services can be provided by Sanghvi Enterprise Products in order to meet the exact specifications of your stainless steel plate requirements.

Stainless Steel Plate Mill Plate: Stainless Steel Grades, Thicknesses and Widths

Stainless Steel Plate Polishing

We can polish nearly any stainless steel plate item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. Stainless plates can be polished on one side or two sides. Stainless steel polished plates can also be cut to size. Pitt free surfaces can also be provided.

Stainless Steel Plate Beveling

We can bevel the edges of stainless steel plate to prepare for welding or other processes.

Blanchard grinding

Stainless steel plate flatness in critical in certain applications. Sanghvi Enterprise can provide blanchard grinding of stainless steel plates upon customer request.

Heatreating & Annealing

Some grades of stainless steel plates can be heatreated to change the mechanical properties. Precipitation Hardening Stainless Steels such as 17-4PH can be heatreated. 410 stainless steel plate can also be heatreated. In some cases, secondary annealing 300 series stainless steel may be required depending on the application

Positive Material Identification (PMI)

Sanghvi Enterprise can perform PMI testing in house for most stainless steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications.

UT Testing

In some cases, UT testing of the stainless steel plates may be required. We can assist you with this requirement.

Stainless Steel Plate Specifications

ASTM A167

This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip and various stainless steel grades. This specification is not frequently referenced for stainless steel plate products as ASTM A 240 incorporates much of the same information and standards as ASTM A167.This specification now conforms to the applicable requirements for A480/A480M

ASTM A176

This ASTM Specification covers stainless steel and heat-resisting chromium-nickel steel plate, sheet and strip. Like ASTM A167, many grade specific requirements were replaced or incorporated into ASTM A 240.This specification now conforms to the applicable requirements for A480/A480M

ASTM A240

This specification governs a group of general requirements associated with stainless steel plate, sheet and strip, including the following specifications issued by ASTM: A167, A176, A240/A240M, A263, A264, A265, A666, A693, A793, and A895. ASTM A480 covers thickness tolerances, manufacturing requirements for stainless steel plate.

ASTM A693

This ASTM specification governs specifications for precipitation-hardening stainless steel plate, sheet, and strip. For example, 17-4Ph stainless is covered under ASTM A693.

ASTM A480

This is the most frequently cited stainless steel plate specification for 300 series stainless steels. This specification covers chromium, chromium-nickel, and chromium-manganese-nickel stainless steel plate, sheet, and strip for general applications

Stainless Steel Plate Tolerances

Tag : Stainless Plate Tolerances / Ss Plate Thickness Tolerance / Stainless Steel Plate Tolerances / Stainless Plate Thickness Tolerance / Stainless Plate Tolerance / Stainless Steel Plate Thickness Tolerance Chart

This table lists the general industry standard specifications for Hot Rolled Annealed and Pickled (HRAP) stainless steel plate.

Gauge LB/Sq. Ft. LB/Sq In. Gauge Tolerance
72″ Wide 96″ Wide
3/16 0.1875 8.579 0.05958 +.045″ -.010″ +.050″ -.010″
7/32 0.2187 9.870 0.06854
1/4 0.2500 11.162 0.07750
5/16 0.3125 13.746 0.09546
3/8 0.3750 16.496 0.11456 +.055″ -.010″ +.060″ -.010″
7/16 0.4375 19.080 0.13250
1/2 0.5000 21.633 0.15044
9/16 0.5625 24.247 0.16838
5/8 0.6250 26.831 0.18633
11/16 0.6875 29.415 0.20427
3/4 0.7500 32.123 0.22308 +.060″ -.010″ +.065″ -.010″
13/16 0.8125 34.707 0.24102
7/8 0.8750 37.291 0.25897
15/16 0.9375 39.875 0.27691
1 1.0000 42.665 0.29628 +.070″ -.010″ +.075 -.010″
1-1/8 1.1250 47.833 0.33217
1-1/4 1.2500 53.001 0.36806
1-3/8 1.3750 58.169 0.40395
1-1/2 1.5000 63.337 0.43984
1-3/4 1.7500 73.672 0.51161
2 2.0000 84.008 0.58339 +.125″ -.010″ +.150″ -.010″
2-1/8 2.1250 89.610 0.62229
2-1/4 2.2500 94.777 0.65817
2-1/2 2.5000 105.113 0.72995
2-3/4 2.7500 115.449 0.80173
3 3.0000 126.301 0.87709 +.150″ -.010″ +.160″ -.010″
3-1/2 3.5000 146.972 1.02064
4 4.0000 168.264 1.16850 +.180″ -.010″ +.200″ -.010

Flatness Tolerances of Plate Mill Plate:

Tag : Stainless Plate Flatness Tolerance / Stainless Steel Plate Flatness Tolerance Chart / Stainless Steel Plate Flatness Tolerance
  • Tolerance in this table apply to any length, not necessarily the rolling direction, up to 36 in. (914 mm) of the longer lengths in the plane of the plate measured while the plate rests on a flat surface with the concavity of the curvature upward.
  • If the longer dimensions are under 36 in. (914 mm), the tolerance is not greater then 1/4 in. (6.4mm).
  • For plates with specified minimum yield strengths of 35 ski (240 MPa) or more, the permitted variations are increased to 1 1/2 times the amounts shown.
Specified Thickness (t), in. (mm) Flatness Tolerance for Thicknesses Given, in. (mm)
t < 1/4 (6.35) 7/16 (11)
1/4 <= t < 3/8 (9.52) 3/8 (9.5)
3/8 (9.52) <= t < 1/2 (12.70) 5/16 (7.9)
1/2 (12.70) <= t < 3/4 (19.05) 5/16 (7.9)
3/4 (19.05) <= t < 1 (25.40) 5/16 (7.9)
1 (25.40) <= t < 1-1/2 (38.10) 1/4 (6.4)
1 1/2 (38.10) < = t < 4 (101.60) 1/4 (6.4)
t >=4 (101.60) 1/4 (6.4)
  • Permitted Variation in thickness of Hot-Rolled, Wide, Coil-Processed Product as Coil and Cut Lengths.
  • A Thickness Measurements are taken at least 3/8 in. from the edge of the sheet.
Specified Thickness in. Permitted Variations, in. Over and Under, Except as Indicated Otherwise for Specified Width (w) in.
Width <=60 Width >60
>0.1875 to 0.250 -0.010; +0.020 -0.010; +0.020
>0.250 to 0.3125 -0.010; +0.022 -0.010; +0.022
>0.3125 -0.010; +0.030 -0.010; +0.030

Quick Enquiry

 


 

 

Contact Sanghvi Enterprise today for a best offer & competitive quotation Of Stainless Steel Pipe & Tube
Call: +91-22-2387 9711, 6639 4261, 6743 6461
Email: info@sanghvienterprise.com

 

 

Copyright © Sanghvi Enterprise, All Rights Reserved .WebSite Design & SEO by www.mesotek.com | Sitemap | Blog