Stainless Sheet Gauge Sizes and Rate Per Kg in India

Buy SS Cold Rolled Steel Sheet From India's 3rd Largest Stockist And Supplier At Best Price.

Know more about hot rolled steel plate grades, SS Plate Density and Specifications

Table of Contant

Stainless Steel Sheet Specification
Stainless Steel Sheet Astm Grades
Stainless Steel Sheet Hs Code
Stainless Steel Sheet Types
Stainless Steel Sheet Manufacturers
Stainless Steel Sheet Stock
Stainless Steel Sheet Gauge Chart
Stainless Steel Sheet Weight Chart
Stainless Steel Sheet Finish Types
Stainless Steel Sheet Density
Stainless Steel Sheet Thickness Tolerance
Stainless Steel Sheet Application
Stainless Steel Sheet Price List
Stainless Steel Sheet Unit Weight
SS Sheet Weight Calculator



ARE YOU LOOKING TRUSTED SUPPLIERS DEALERS & DISTRIBUTORS OF STAINLESS STEEL SHEET & PLATES IN INDIA : Sanghvi Enterprise India ISO 9001 / 14001 & 18001 Certified Stainless Steel Sheet/ Stainless Steel Plate suppliers in India, Sanghvi Enterprise is the most trusted steel sheet companies in the India and abroad.

LOOKING FOR AFFORDABLE STAINLESS STEEL SHEET PRICE IN INDIA / MALAYSIA / CANADA / JOHANNESBURG / DURBAN / CAPE TOWN / DUBLIN / SOUTH AFRICA / SYDNEY / MELBOURNE / PERTH / AUSTRALIA / NIGERIA / THAILAND OR UK. CHECK PRICE CURRENCY WISE

Stainless Steel Sheet Specification
Astm Grades Astm A240 / Asme Sa240
Stainless Steel Sheet Hs Code 72199013 / 72199090 / 72193590 / 72192190
STAINLESS STEEL AISI ASTM ASME GRADES: AISI 304, AISI 304L, AISI 316, AISI 316L, AISI 309, AISI 310, AISI 317L, AISI 321, AISI 347, AISI 409, AISI 410, AISI 420, AISI 430, AISI 446 Sheet
STAINLESS STEEL WERKSTOFF NUMBER : W.N. 1.4305, Din 1.4570, Din 1.4828, Din 1.4845, Din 1.4841, Din 1.4598, Din 1.4435, Din 1.4435, Din 1.4435, Din 1.4571, Din 1.4541, Din 1.4301, Din 1.4307, Din 1.4401, Din 1.4404 Sheet
UNS Grades SS 202 UNS S20200, SS 304 UNS S30400, SS 304L, (UNS S30403), SS 304H, (UNS S30409), SS 309, (UNS S30900), SS 309H, (UNS S30909), SS 310, (UNS S31000), SS 310S, (UNS S31008), SS 310H, (UNS S31009), SS 316, (UNS S31600), SS 316L, (UNS S31603), SS 316H, (UNS S31609), SS 316TI, (UNS S31635), SS 317, (UNS S31700), SS 317L, (UNS S31703), SS 321, (UNS S32100), SS 321H, (UNS S32109), SS 347, (UNS S34700), SS 347H, (UNS S34709), SS 409, (UNS S40900), SS 410, (UNS S41000), SS 410S, (UNS S41008), SS 430, (UNS S43000), SS 904L, (UNS N08904), SS 17-4 PH , (UNS S17400), SS 17-7 PH, (UNS S17700), SS 13-8 MO, (UNS S13800)
Stainless Steel Sheet Grade 304, 304/304L, 316, 316/316L, 2205
Thickness (mm) 0.45 to <5.0
Width (mm) 914, 1219, 1500, 2000, Customer specific width
Length (mm) 1829, 2438, Customer specific length
Finish 2B, No.4, BA, No.1 (HRAP), Customer specific polish & 304-2B Finish, 304-4 Finish, 304-8 Finish, 309-2D Finish, 316-2B Finish, 430-2B Finish are the available finishes.
Ready Stock Stainless Steel Sheet Grade 304 Price & Stainless Steel Sheet Price 316 / 409 / 430 / 410 4 X 8 / 0.8mms / 1mm / 1.2mm / 1.5mm / 1.6mm / 2mm / 4mm / 5mm / 6mm / 8mm / 10mm / 4x8 / 14 Gauge / 16 Gauge / 16 Ga / 18 Gauge / 20 Gauge / 22 Gauge / 24 Gauge / 26 Gauge / 28 Gauge Sheet
Polished Sheet Polished sheet is also available.
Standard coating Paper interleaf, PE
Optional coating Laser, Deep drawing PVC
Plasma profiles To customer drawings OR We will cut the sheet as per the requirement.
Stainless Steel Sheet Cut To Size Custom Cut / Sheet Metal Cutting / Laser Cutting / Plasma Cutting / Cutting Hole / Machine Cutting / Saw Cutting Plate & Water Jet Cutting Stainless Steel Sheet
Types of Sheet Sheet, Perforated Sheet, Chequered Plate, Coils, Plate, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle)
Hardness Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Manufacturers POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrup, Baosteel, TISCO, Arcelor Mittal, VDM, Nippon Metal, Outokumpu
STANDARD Sheet UNS Sheet WERKSTOFF NR. Sheet
SS 201 Sheet S20100 Sheet Din 1.4372 Sheet
SS 202 Sheet S20200 Sheet Din 1.4373 Sheet
SS 309H Sheet S30909 Sheet DIN 1.4833 Sheet
SS 310 Sheet S31000 Sheet Din 1.4841 Sheet
SS 310S Sheet S31008 Sheet Din 1.4845 Sheet
SS 310H Sheet S31009 Sheet Din 1.4845 Sheet
SS 316H Sheet S31609 Sheet Din 1.4401 Sheet
SS 317 Sheet S31700 Sheet Din 1.4449 Sheet
SS 13-8 MO Sheet S13800 Sheet Din 1.4534 Sheet
SS 430 Sheet S43000 Sheet Din 1.4016 Sheet

The information provided is for standard stock product and does not encapsulate all available combinations. Please contact Us if non standard product is required and we will enquire about its availability through our global supply network of mills and stockists.

Salient Features:

  • Corrosion resistance
  • Ease of fabrication
  • Long life
  • Sustainability
  • Heat resistance
  • Flawless finish

Stainless Steel Sheet Stock Thickness - Stainless Steel Sheet Stock Sizes - 304 Stainless Steel Sheet Stock

Stainless Steel Sheets Sizes in Stock : 2400 X 1200 / 3mm Thick / 4x8 / 4mm / 5mm / 5mm Thick / 5mm Weight / 6mm / 60 X 120 / 8' X 4' / 36 X 36 / 24 X 48 / 5 X 10 / 48 X 96 / 18 X 18 / 0.5mm / 0.3mm / 0.2mm / 0.1 Mm / 1.5mm / 0.9mm / 0.8mm / 0.7mm / 0.25mm / 0.4mm / 0.5 / 1mm / 1.5mm / 2mm / 2b Finish / 10mm Thick / 1.2mm / 16 Gauge / 18 Gauge / 12 Gauge / 14 Gauge / 20 Gauge / 22 Gauge / 24 Gauge / 26 Gauge / 2.5mm / 2b / 3mm 8 X 4 / / 8mm

Stainless Steel Sheet Thickness Gauge - Stainless Steel Sheet Thickness Chart

Stainless Steel Gauge Chart*

Gauge
Number
Inches MM
8 .17187 4.365
9 .15625 3.968
10 .14062 3.571
11 .125 3.175
12 .10937 2.778
14 .07812 1.984
16 .0625 1.587
18 .050 1.270
20 .0375 .9525
22 .03125 .7937
24 .025 .635
26 .01875 .476
28 .01562 .396
30 .0125 .3175

Stainless Steel Sheet Weight | Stainless Steel Sheet Size | SS Sheet Thickness MM | SS Sheet Length | SS Sheet Dimensions | Sheet Thickness OR Nominal Thickness

WEIGHT PER STAINLESS STEEL SHEET :
THICKNESS IN MM SIZE IN MM WEIGHT KG/M2
2000 X 1000 2500 X 1250 3000 X 1500
0.18 2.88 - - 1.44
0.20 3.20 - - 1.60
0.22 3.52 - - 1.76
0.24 3.84 - - 1.92
0.27 4.32 - - 2.16
0.28 4.48 - - 2.24
0.32 5.12 - - 2.56
0.38 6.08 - - 3.04
0.44 7.04 11.00 - 3.52
0.50 8.00 12.50 - 4.00
0.56 8.96 14.00 - 4.48
0.63 10.08 15.75 - 5.04
0.75 12.00 18.75 - 6.00
0.88 14.08 22.00 - 7.04
1.00 16.00 25.00 36.00 8.00
.1.13 18.08 28.25 40.00 9.04
1.25 20.00 31.25 45.00 10.00
1.38 22.03 34.50 50.00 72.00
1.50 24.00 37.50 54.00 12.00
1.75 28.00 43.75 63.00 14.00
2.00 32.00 50.00 72.00 16.00
2.25 36.00 56.25 81.00 18.00
2.50 40.00 62.50 90.00 20.00
2.75 44.00 68.75 99.00 22.00
3.00 48.00 75.00 108.00 24.00
3.25 52.00 81.25 117.00 26.00
3.50 56.00 87.50 126.00 28.00
3.75 60.00 93.75 135.00 30.00
4.00 64.00 100.00 144.00 32.00
4.25 68.00 106.25 153.00 34.00
4.50 72.00 112.50 162.00 36.00
5.00 80.00 125.00 180.00 40.00
5.50 88.00 137.50 198.00 44.00
6.00 96.00 150.00 216.00 48.00
6.50 104.00 162.50 234.00 52.00
7.00 112.00 175.00 252.00 56.00
7.50 120.00 187.50 270.00 60.00
8.00 128.00 200.00 288.00 64.00

Widest Stock Of 2b Surface Finish Stainless Steel Sheet, SS Plate, Coils,Strips, Foil And Get Exact Information About 2d Surface Finish Ra Standards

Stainless steel sheet, 0.45mm to less than 5.0mm - ASTM A240M
Sanghvi Enterprise (established in 1973) Suppliers of ss popular range grades, widths and thicknesses of stock to be held inits bulk coil program at its processing service centre to meet customer demand. The standard range is as follows:

Grade Finish Types Thickness (mm) Width (mm) Length (mm)
SS 304 2B, No. 4 PE 0.55 914, 1219 1828, 2438
SS 304 2B, No. 4 PE 0.70 914, 1219 1828, 2438
SS 304 2B, 2B PE, No. 4 PE, BA PE 0.90 914, 1219 1828, 2438
SS 304 2B, 2B PE, No. 4 PE, BA PE 1.20 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
SS 304 2B, 2B PE, No. 4 PE 1.50 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
SS 304 2B, 2B PE, No. 4 PE 1.60 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
SS 304 2B, 2B PE, No. 4 PE 2.00 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
SS 304 2B, 2B PE, No. 4 PE 2.50 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
SS 304 2B, 2B PE, No. 4 PE 3.00 914, 1219, 1500 1828, 2438, 3000, 3048, 3658
SS 304L 2B, 2B PE 4.00 1500, 2000 3000, 6000
SS 316 2B 0.55 1219 2438
SS 316 2B 0.70 1219 2438
SS 316 2B 0.90 1219 2438
SS 316 2B, No. 4 PE 1.20 1219 2438
SS 316 2B, No. 4 PE 1.50 1219, 1500 2438, 3000, 3658
SS 316 2B, No. 4 PE 1.60 1219, 1500 2438, 3000, 3658
SS 316 2B, No. 4 PE 2.00 1219, 1500 2438, 3000, 3658
SS 316 2B, No. 4 PE 2.50 1219, 1500 2438, 3000, 3658
SS 316 2B, No. 4 PE 3.00 1219, 1500 2438, 3000, 3658
SS 316L 2B, 2B PE 4.00 1500, 2000 3000, 6000
SS 430 BA PE, No. 4 PE 0.70 914, 1219 1828, 2438
SS 430 BA PE, No. 4 PE 0.90 914, 1219 1828, 2438
3CR12 2B 1.2 1250 2500
3CR12 2B 1.6 1250 2500
3CR12 2B 2.0 1250 2500
3CR12 No. 1 4.0 1250, 1500 2500, 3000, 6000

Other grades and widths
Grades: 301L, 310, 321, 2205, 253MA.
Widths (mm): 600, 750, 900, 1050, 1200, 1524.

Fixed billing weights for flat rolled stainless steel

Thickness Austenitic nominal mass (kg/m²) Ferritic nominal mass (kg/m²)
0.45 3.68  
0.55 4.50  
0.70 5.72  
0.90 7.36  
1.20 9.81 9.61
1.50 12.3  
1.60 13.08 12.85
2.00 16.35 16.02
2.50 20.44 20.03
3.00 24.53 24.04
4.00 32.71 32.06

Austenitic stainless steel theoretical weight is based on 8177kg/m³
Ferritic stainless steel theoretical weight is based on 8000kg/m³

Actual weights may vary from the above due to specific grade and dimensional tolerances.

Types of Stainless Steel Sheet Finishes - Stainless Steel Sheet Surface Finish Chart ( Stainless Steel Sheet Metal Finish Grades )

Basic Stainless Steel Sheet Finish Designation : The following list of Stainless Steel Sheet Finish Chart designations includes a short description of how each surface may be obtained.

  • Unpolished Finish No. 1: A dull finish produced by hot rolling to a specified thickness, followed by annealing and descaling.Stainless Steel Sheet Finishes Chart
  • Unpolished Finish No. 2D: A dull finish produced by cold rolling to a specified thickness, followed by annealing and descaling. May also be accomplished by a final, light roll pass on dull rolls.
  • Unpolished Finish No. 2B: A bright finish commonly produced in the same way as 2D except that the annealed and descaled sheet receives a final, light coldroll pass on polished rolls. This is a general purpose, cold-rolled finish, and is more readily polished then the No. 1 or No.2D finishes.
  • Polished Finish No. 3: An intermediate polished finish generally used where a semi polished surface is required for subsequent finishing operations following fabrication, or as a final finish with a 50- or 80-grit
    abrasive compound.
  • Polished Finish No. 4: A general purpose bright polished finish obtained with a 100-180 mesh abrasive, following initial grinding with coarser abrasives.
  • Buffed Finish No. 6: A soft satin finish having a lower reflectivity than No.4 finish. It is produced with a greaseless compound, #200 grit, top dressed with white rouge or chromium green rouge.
  • Buffed Finish No. 7: A highly reflective finish produced by buffing a surface that has first been refined to approximate a No. 6 finish, then buffed lightly with a white rouge without removing satin finish lines.
  • Buffed Finish No. 8: The most reflective finish commonly produced. It is obtained by flexible polishing with successively finer abrasive compounds, then buffing extensively with a very fine chromium green rouge bar compound.

Stainless Steel Sheet Finish Grades

Three more common stainless steel finishing options are :

  1. No. 2B – Matte finish
  2. No. 4 – Brushed finish
  3. No.8 – Mirror finish

No. 2B – Matte finish

No. 2B – Matte Finish (Tag : Finish 2b / Mirror Finish / Brushed Finish / #4 Finish / Hairline Finish / 304 SS Sheet #4 Brushed Finish | 304 Stainless Steel Sheet #4 Finish | #8 Finish Stainless Steel Sheet | Hairline Finish | Glasgow | Embossed | #8 Mirror Finish | 4b Finish | 2b Finish | No 4 Finish)

No. 2B is the mill finish, meaning it has not been processed further. Matte finishes are dull in appearance and are not ideal for aesthetic end uses. However, they’re a good choice where appearance is not important or when further finishing is intended. No. 2B Matte finishes are the least expensive of the stainless steel finishing options.

The finish is produced by ‘cold rolling’ stainless steel through special rolls or dies. The cold rolling produces a smoother, less pitted surface. Next it is softened and de-scaled in acid solution. The steel is given a final pass on polished rolls to further enhance its smoothness.

Common applications include:

  • Chemical plant equipment
  • Pharmaceutical equipment
  • Paper mill equipment
  • Laundry and dry cleaning
  • Refrigeration
  • Sewage equipment

No. 4 – Brushed finish

No. 4 Brushed Finish ( Tag : Mirror Finish Stainless Steel Sheet Uk | Matte Finish Stainless Steel Sheet | Surface Finish Of Stainless Steel Sheet | Vibration Finish Stainless Steel Sheet)

The No. 4 Brushed finish can vary with different suppliers and even from batch to batch from the same supplier. The variations arise from differing manufacturing conditions, such as wearing of the abrasive belts used in these finishes. Some level of variation should be expected when ordering No. 4 Brushed finish. It can be helpful to request a sample of a few square inches to ensure the finish achieves the desired effect.

Brushing the stainless steel produces a distinctive look with a muted luster and a pattern of fine parallel lines. It has strong decorative appeal without being too reflective, as too much reflectiveness can be undesirable. For example, overly reflective stainless steel accents on a building could be blinding in bright sunlight. The drawbacks to this finish include reduced corrosion resistance, because the grooves of the finish are susceptible to rust.

The finish is created by sanding the stainless steel in one direction with a 120-180 grit belt, followed by softening with a 80-120 grit medium non-woven belt

Common applications include:

  • Jewelry and watches
  • Home appliances
  • Air conditioners
  • Water heaters
  • Architecture
  • Automotive design

No.8 – Mirror finish

( Tag - Stainless Steel Sheet Mill Finish | How To Finish Stainless Steel Sheet | Stainless Steel Sheet Metal Finish | Stainless Steel Sheet Metal Surface Finish)

Mirror finishes are highly reflective and created by polishing the stainless steel. The polishing process enhances appearance and consistency, making cleaning easier. It also masks the after-effects of welding and hides surface damage.

No. 8 Mirror finish is created by mechanically treating the surface with a series of progressively finer abrasives. Alternatively a special rolling procedure is used which can simulate the appearance of mechanical abrasion. For this stage, it is essential to remove deep scratches as any surface defects will be very noticeable on the finished product. The final process involves buffing the surface for 5-10 minutes to create a mirror-like, highly reflective finish.

A benefit of No. 8 Mirror finishing is that it improves corrosion resistance. The polishing eradicates crevices where corrosive particles can lodge themselves.

Common applications include:

  • Mirrors
  • Ornamental trim
  • Clean rooms
  • Column covers
  • Wall panels
  • Reflectors

Stainless Steel Sheet Density

Material DENSITY (lb/in³) DENSITY (Kg/m³)
Stainless Steel 301 0.285 7888.77284
Stainless Steel 302 0.284 7861.092935
Stainless Steel 304 0.289 7999.492458
Stainless Steel 316 0.284 7861.092935
Stainless Steel 420 0.278 7695.013507
Stainless Steel 430 0.283 7833.41303
Stainless Steel 440 0.279 7722.693411

Stainless Steel Sheet Thickness Tolerance OR Stainless Steel Sheet Metal Tolerances Table Chart

Thickness
in. (mm)
Sheet Width
36 (914.4)
in. (mm
48 (1,219)
in. (mm)
0.017–0.030 (0.43–0.76) 0.0015 (0.038) 0.002 (0.051)
0.031–0.041 (0.79–1.04) 0.002 (0.051) 0.003 (0.076)
0.042–0.059 (1.1–1.5) 0.003 (0.076) 0.004 (0.10)
0.060–0.073 (1.5–1.9) 0.003 (0.076) 0.0045 (0.11)
0.074–0.084 (1.9–2.1) 0.004 (0.10) 0.0055 (0.14)
0.085–0.099 (2.2–2.5) 0.004 (0.10) 0.006 (0.15)
0.100–0.115 (2.5–2.9) 0.005 (0.13) 0.007 (0.18)
0.116–0.131 (2.9–3.3) 0.005 (0.13) 0.0075 (0.19)
0.132–0.146 (3.4–3.7) 0.006 (0.15) 0.009 (0.23)
0.147–0.187 (3.7–4.7) 0.007 (0.18) 0.0105 (0.2

Stainless Steel Sheet Application OR USES

SS Sheet Engineering
SS Sheet For Fridge
SS Sheets For Fireplace
SS Panels For Food Truck
SS Sheet Food Grade
SS Sheet For Jewelry Making
SS Sheet Metal For Kitchen Walls
SS Sheets For Kitchen Wall Cladding
SS Panels For Kitchen Appliances
SS Sheet For Kitchen Backsplash
SS Sheets Kitchen Backsplash
SS Sheet For Kitchen Wall
SS Sheet For Countertop
SS Sheet For Bbq
SS Sheet On The Wall
SS Sheet For Gate
SS Sheet For Dishwasher
SS Sheet For Grill
SS Panels For Appliances
SS Sheets For Crafts
SS Sheets For Catering
SS Sheets For Counters
SS Panels For Ceiling
SS Panels For Cabinets

Check Difference between CR Sheet and HR Sheet and cold rolled steel prices 2019

Where To Buy Stainless Steel Sheet Price? Stainless Steel Sheet For Sale & Stainless Steel Sheet Price List 2019
Corrugated Stainless Steel Sheet Price
Stock 105 Ton / Price US $1500-4000 / Per Tonne
Stainless Steel Sheet Prices Sri Lanka
Stock 64 Ton / Cost Sri Lankan Rupee 421.70 to 730 Rate Per Kg
SS Mirror Finish Sheet Price
Stock 120 Ton / Cost INR Rs 165 to 230 Rate Per Kg
2b Finish / 10mm Thick / 1.2mm / 1 / / 2.5mm / 2b / 3mm 8 X 4 / / 8mm Roofing Sheet Price
US$ 1,000.00-US$ 4,500.00 / Ton
Brushed Stainless Steel Sheet Market Price
Stock 62 Tonne / Price US$ 1,400.00 - 3,700.00 / Ton
Jindal Stainless Steel Sheet Price List ( 300 Series )
Stock 235 Ton / Cost - Rs 165 to 256 INR Rate Per Kg
Stainless Steel Sheet Cost Per Square Foot
RS 190 to 240 INR Per Square Foot
Current Black Stainless Steel Sheet Wholesale Price
Stock 55 Ton / Cost US$ 1,000.00-US$ 3,000.00 / Metric Ton
304 / 316 Stainless Steel Sheet For Sale Philippines
Stock 55 Ton / Cost 122.39 to 165.46 Philippine Piso Per Kg
304 / 316 Stainless Steel Sheet For Sale London
Stock 46 Tonne / Price 1.94 to 2.94 Pound Sterling Rate Per Kg
SS Sheet Metal Price Per Pound
Cost 1.94 to 2.94 Pound Sterling Rate Per Kg
Stainless Steel 304 / 316 Sheet Price in Delhi / Bangalore / Chennai / Hyderabad / Kolkata India
Stock 540 Ton / Cost - Rs 165 to 250 INR Rate Per Kg
Stainless Steel Sheet Price Malaysia
Stock 230 Ton / Cost Malaysian Ringgit 9.87 to 14 Rate Per Kg
Mirror Stainless Steel Sheet Metal Price Canada
Stock 125 Tonne / Price Canadian Dollar 3.13 to 6 Per Kilogram
Price of SS Sheet Per Kg In India
Stock 540 Tonne / Cost - Rs 165 to 250 INR Rate Per Kg
SS 304 & 316 Sheets For Sale Johannesburg / Durban / Cape Town / Dublin / South Africa
Stock 245 Tonne / Price 33.58 to 48 South African Rand Rate Per Kg
Food Grade Stainless Steel Sheet Price Alibaba
Price US $500-3400 Per Ton
SS Sheet Prices Sydney / Melbourne / Perth / Australia
Stock 230 Tonne / Cost Australian Dollar $ 3.42 to 6.12 Per Kilogram
Price Of Stainless Steel Sheet in Nigeria
Stock 45 Ton / Price Nigerian Naira 868.41 to 1600 Per Kg
Stainless Steel Sheet Metal Prices Uk
Stock 230 Ton / Price Pound sterling 1.93 to 3.5 Per Kilogram
Stainless Steel Sheet Price Thailand
Stock 230 Ton / Cost Thai Baht 74.13 to 180 Per Kilogram
0.5mm / 0.3mm / 0.2mm / 0.1 Mm / 1.5mm / 0.9mm / 0.8mm Stainless Steel Sheet Price
US$ 1,000.00-US$ 4,500.00 / Ton
22 Gauge / 24 Gauge / 26 Gauge Stainless Steel Sheet Price
US$ 1,000.00-US$ 4,500.00 / Ton
6 Gauge / 18 Gauge / 12 Gauge / 14 Gauge / 20 Gauge Sheet Price
US$ 1,000.00-US$ 4,500.00 / Ton
SS Sheet Cost Per Square Foot
RS 190 to 240 INR Per Square Foot
0.7mm / 0.25mm / 0.4mm / 0.5 / 1mm / 1.5mm Price / 2mm SS Sheet Roll Price
US$ 1,000.00-US$ 4,500.00 / Ton

Stainless Steel Sheet Weight Calculator

OUR Suppliers, Dealers & Distributors in Below

Edinburgh, Edmonton, Faridabad, Coimbatore, Kolkata, India, Delhi, Chennai, Ireland, Nigeria, Brisbane, Singapore, Kenya, Europe, Exeter, Karachi, Kenya, Jakarta, Hobart, Gold Coast, Houston, Suppliers Johannesburg, Jaipur, Johannesburg, Jammu, Kansas City, Korea, Nottingham, Nz, Mumbai Maharashtra, Newcastle, Northern Ireland, Nagpur, Norwich, London, Leicester, Los Angeles, Liverpool, Delhi, Offcuts Brisbane, Offcuts Perth, Ottawa, Uk, Uae, Usa, Hyderabad, Rajkot, Coimbatore, Pune, Chennai, Delhi, Bangalore, Zimbabwe, Vadodara, Perforated Nz, Brushed Nz, Nz, Uk Suppliers, Udaipur, Uk, Toronto, Vancouver, Vietnam, Victoria Australia, Victoria, Qatar, Ontario, Qatar, Offcuts Sydney, Leeds, Chennai, Norfolk, Kijiji, Nigeria, Australia, Auckland, Adelaide, Delhi

201 / 301 / 304 / 321 / 310 / 302 / 316 / 347 / 303 / 440c / 410 / 430 / 409 / 439 / 420 / 446 / 17-4 / 15-5 Stainless Steel Sheet Stockist & Suppliers in Uk, Coimbatore, Chennai, Delhi, Singapore, Uae, Delhi, Johor Bahru, South Africa, Saudi Arabia, Singapore, Brisbane, Birmingham, Bristol, Bangalore, Black, Brushed, Cardiff, Cape Town, China, Gold Coast, Chennai, Durban, Dandenong, Delhi, Abu Dhabi, Delhi, Edmonton, Europe, Europe, Gauteng, Gauteng, Germany, Ghaziabad, Germany, Hull, Houston, Korea, Korea, Kenya, Korea, London, Ludhiana, Melbourne, Melbourne, West Midlands, Maharashtra, Mumbai, Near Me, Newcastle, Northern Ireland, Nottingham, Nz, Ontario, Ontario, Perth, Pretoria, Perth Wa, Plymouth, Penang, Pretoria, Philippines, Qatar, Riyadh, Singapore, Tamilnadu, Turkey, Usa, Uk, Uae, Usa, Uk, Vadodara

Quick Enquiry

Contact Sanghvi Enterprise today for a best offer & competitive quotation Of Stainless Steel Sheet & Plate
Call: +91-22-2387 9711, 6639 4261, 6743 6461
Email: info@sanghvienterprise.com

 

 

Copyright © Sanghvi Enterprise, All Rights Reserved .WebSite Design & SEO by www.mesotek.com | Sitemap | Blog