We have Answers
  • + 91-22-6639 4261
  • vijay@sanghvienterprise.com
  • Mon - Sat: 9am to 6pm

find SS 304 Perforated Sheet Weight Chart and Standard Size Chart here, try our Perforated Sheet Weight Calculator online

 

Stainless Steel Perforated Sheet

 

 

Do you have trouble in SS Perforated Sheet Weight Calculation ? Sanghvi is here to help you, view Weight Perforated Sheet Calculation formula here

 

How do you calculate perforated sheet weight?

In order to calculate the Stainless Steel Perforated Sheet Weight, we have to consider the given formula:
ρ x t / 1.000.000 x {(W - M2 - M4) x (L - M1- M3) x (1- (open area / 100) + (W - M2) x M1 + (L- M3) x M2 + (W - M4) x M3 + (L - M1) x M4}

  • * Where, ρ is the density in kg/dm3
  • * t is the sheet’s thickness in mm
  • * W is the sheet’s width calculated in mm
  • * L is the sheet’s length in mm
  • * OA is the open area expressed in percentage
  • * M1, M2, M3, and M4 are the width of the margins in mm


You can also find Perforated Sheet Weight Calculator on the websites of different manufacturers which will help you get the result instantly as you enter the required data. Clients can also find it from the SS 304 Perforated Sheet Weight Chart.

 

How do you measure perforated sheets?

The thickness of the perforated sheet is measured from the top to the bottom surface of the given material or the Perforated Sheet Standard Size Chart. The thickness is usually measured in gauge but they can also be measured in mm and fraction of an inch according to the requirements. The calculations for the S Perforated Sheet Weight Per Sqm is given above, with all the details the Weight Perforated Sheet can be found out easily.

 

What is perforation ratio?

The perforation ratio, also known as the open area, is the ratio reflecting the area of the sheet occupied by holes. They are normally expressed in percentages. This means, if the open area of the Perforated Sheet Dimensions is 30%, this means the hole occupies 30% of the area and the material occupies 70%. The hole size can vary from a few thousandths of an inch to more than three inches. The Perforated Sheet Hole Size Chart would give an idea of the hole dimensions available on the perforated sheet.

 

What is pitch in perforated sheet?

The pitch, denoted by ‘t’ can be defined as the distance calculated from the center of two adjacent holes, no matter their shape, or rows of holes. The Perforated Plate Thickness Calculation also impacts this, as knowing the width and length of the holes are important for getting the results. The SS Perforated Sheet Rate would also vary with the change in the pitch of the perforated sheet.

 

How do you measure a hole size?

Just like the SS Perforated Sheet Weight Calculation is elaborate, measuring the hole size of a perforated sheet is also an elaborate process. It depends on the pitch and shape of the hole:

  • * Triangular pitch and round holes= R² x 90.69 / T²
  • * Square pitch and round holes= R² x 78.5 /U1 X U2
  • * Square pitch and square holes= C2 x 100 / U1 X U2
  • * Staggered pitch and square holes= C2 x 100 / 0.5 x (Z1 X Z2)
  • * Staggered pitch and rectangular holes= 100 X L X C / 0.5 x (Z1 X Z2)

 

Perforated Sheet Weight Calculator
rho
t
w
L
OA
M1
M2
M3
M4

 

SS 304 Perforated Sheet Weight Chart
Product(s) Alloy Weight Each(#) Thickness(T) Hole Size(T) Test Length(L) Hole Pattern Hole Center
304 Perforated Stainless Sheet 304 48.38 16 ga 3/8" 48" 96" Staggered 9/16"
39.51 16 ga 3/4" 1"
29.03 20 ga 1/8" 3/16"
28.07 20 ga 1/4" 3/8"

 

Perforated Sheet Standard Size Chart

Stainless Steel Perforated sheet - 2m x 1m sheet:

Stainless Steel Perforated Sheets (2m x 1m)
Perforated round hole and perforated square hole
Round Hole (R)
Square Hole (C)
Perforated sheets
Pattern
Hole Size in mm
Pitch in mm
% Open Area
Sheet Size
Thickness in mm
Stainless Steel Perforated sheets
S011
R0.75
T1.50
23
2m x 1m
0.60
S022
R1.00
T2.00
23
2m x 1m
0.80
S025
R1.50
T2.60
30
2m x 1m
1.00
S028
R1.50
T2.50
33
2m x 1m
0.60
S038
R2.00
T3.00
40
2m x 1m
1.00
S040
R2.00
T3.50
30
2m x 1m
1.00
S048
R2.50
T4.00
36
2m x 1m
0.60
S056
R3.00
T5.00
33
2m x 1m
1.00
S057
R3.00
T4.50
40
2m x 1m
1.20
S064
R3.00
T5.00
33
2m x 1m
1.50
S065
R3.00
T5.00
33
2m x 1m
2.00
S066R
R3.00
T6.00
23
2m x 1m
3.00
S067
R4.00
T6.00
40
2m x 1m
1.00
S068
R4.00
T6.00
40
2m x 1m
1.50
S071
R5.00
T7.00
46
2m x 1m
1.00
S072
R5.00
T8.00
35
2m x 1m
1.50
S073
R5.00
T8.00
35
2m x 1m
2.00
S074
R5.00
T8.00
35
2m x 1m
3.00
S076
C5.00
U8.00
39
2m x 1m
1.00
S082
R6.00
T9.00
40
2m x 1m
0.60
S086
R6.00
T9.00
40
2m x 1m
1.00
S091
R6.00
T9.00
40
2m x 1m
1.50
S093
R6.00
T9.00
40
2m x 1m
3.00
S094
C8.00
U12.00
44
2m x 1m
1.00
S095
R8.00
T12.00
40
2m x 1m
1.50
S104
C10.00
U12.00
70
2m x 1m
1.00
S105
C10.00
U12.00
70
2m x 1m
1.50
S106
R10.00
T15.00
40
2m x 1m
1.00
S107
R10.00
T15.00
40
2m x 1m
1.50
S108
R10.00
T15.00
40
2m x 1m
2.00
S109
R10.00
T15.00
40
2m x 1m
3.00
S155
R15.00
T21.00
46
2m x 1m
1.50
S202
R20.00
T28.00
46
2m x 1m
2.00

 

Stainless Sheet Perforated Stocked in 4′ x 8′ & 4′ x 10′ Sheets:

  • X = Stocked Item
  • D = 5 -10 work days for typical delivery’s
Perforated sheets

Gauge

Holes

Staggered Center

Open Area In %

304

304/L

316/L

Stainless Steel Perforated sheets
20
1/8″ Dia
3/16″
40.3
X
D
D
20
3/16″ Dia
1/4″
51.0
X
D
D
18
1/8″ Dia
3/16″
40.3
X
D
D
18
3/16″ Dia
1/4″
51.0
X
D
X
18
1/4″ Dia
3/8″
62.0
X
D
D
16
1/8″ Dia
3/16″
40.3
X
X
D
16
3/16″ Dia
1/4″
51.0
X
X
D
16
1/4″ Dia
3/8″
62.0
X
X
X
16
3/8″ Dia
1/2″
40.3
X
X
X
16
1/2″ Dia
11/16″
47.9
X
X
D
14
1/8″ Dia
3/16″
40.3
X
X
D
14
3/16″ Dia
1/4″
51.0
X
X
X
14
1/4″ Dia
3/8″
40.3
X
X
D
12
3/16″ Dia
5/16″
36.2
X
D
D
11
1/8″ Dia
3/16″
40.3
X
D
D
11
1/4″ Dia
3/8″
40.3
X
X
X
11
3/8″ Dia
1/2″
51.0
X
X
D

Stainless Steel Perforated sheet - 2.5m x 1.25m sheets

Perforated Stainless Steel (2.5m x 1.25m)
Perforated round hole and perforated square hole
Round Hole (R)
Square Hole (C)
Perforated sheets % Open Area Hole Size Pattern Pitch Thickness Sheet Size
Stainless Steel Perforated sheets 33 R3.00mm S056A T5.00mm 1.00mm 2.5m x 1.25m
33 R3.00mm S064A T5.00mm 1.50mm 2.5m x 1.25m
35 R5.00mm S072A T8.00mm 1.50mm 2.5m x 1.25m
40 R10.00mm S107A T15.00mm 1.50mm 2.5m x 1.25m

 

if you are looking for Weight Of Perforated Sheet, find here MS Perforated Sheet Weight chart Per Sqm

 

MS Perforated Sheet Weight Per Sqm
Thickness Weight kg/m2 2m x 1m 2.5m x 1.25m 3m x 1.5m 4m x 2m
6mm 48 96 150 216
5mm 40 80 125 180
4mm 32 64 100 144
3mm 24 48 75 108 192
2.5mm 20 40 62.5 90
2mm 16 32 50 72 128
1.5mm 12 24 37.5 54
1.2mm 9.6 19.2 30 43.2
0.9mm 7.2 14.4 22.5
0.7mm 5.6 11.2 17.5
0.5mm 4 8 12.5

 

Calculation Of Perforated Sheet Weight Per Square Meter

Calculation of Perforated Sheets weight per square meter can be done as reference below:


ps = absolute (specific) weight (Kg) , v/p = open area (%) , s = thickness mm , kg = [s*ps*(100-v/p)]/100


Open area calculation when holes 60° staggered:

  • V/p = open area (%) ,D = holes diameter (mm) ,P = holes pitch (mm) ,v/p = (D2*90,7)/p2
  • S = Thickness in mm   D = Wire Diameter in mm     P = Pitch in mm    V = Open Area %


Some patterns as following:

Calculation Of Perforated Sheet Weight Per Square Meter

 

Perforated Sheet Stock list
Product hot specifications Grade
Perforated plate
thickness 1.25 mm
size 3242 × 728
as per din 50049 2.2 mat test cert
SS 304
Perforated plate thickness: 8 mm.
hole diameter: 10 mm (holes in staggered row)
4' × 8' × 8 mm,
pitch: 15 mm
SS 316L
perforated sheets

open area: 40%.
hole size: 1/4" staggered holes
sheet size: 48" × 120"
11 gauge

SS 304
perforated plate 0.094" holes staggered on 0.156" centers
16 gauge
Size:12" × 12
33% open area
SS 316L
perforated sheets on 1" straight center 1/4" square holes SS 304
Perforated stainless steel sheets
hole size: 10 mm
sheet size: 2000 mm × 800 mm × 2 mm thick
hole distance: 10 mm.
SS 304 Mill finish
Stainless steel perforated sheets metal
sheet size: 288" length × 40" width
with round hole
SS 304
Stainless steel perforated sheets
6.35 mm open holes.
2.5 m × 6 m × 1.6 mm thickness
SS 304L
Stainless steel perforated slotted sheets
thickness: 1.0 mm
aperture: 5 mm
sheet size: 4' × 8'.
SS 316
Perforated sheets

sheet size 4 ft × 4 ft.
hole diameter 4.5 mm
thickness 0.075 inch
pitch 1.5 mm
SS 416
Perforated sheets
thickness 1 mm
size 1000 × 2000 mm
AISI 304
Perforated sheets pitch 1.5 mm,
hole diameter 4.5 mm,
sheet size 4 ft × 4 ft.
thickness 0.078 in,

SS 416
Perforated stainless sheets
Sheet size: 78 3/4" × 22 1/4 " for the sidelights,
in either 3/4" hole or 3/16" holes 60 degree staggered
for the door inserts 65 7/8" × 26"
SS 304
Perforated stainless sheets
1/4" diameter holes,
45 degree staggered holes.
sheet size: 24" × 36",
SS 316
perforated stainless steel sheets
hole distance: 0.066"
hole size: 0.045"
24 gauge
sheet size: 36" × 96".
straight line
SS 304
Stainless steel perforated sheets sheet size: 4 ' × 8'. SS 201
Perforated steel mill finish margin on all 4 sides,
centers with a 1 5/8" 1/8" holes on 3/16" staggered
sheet size:
36" w × 88" h.
48"w × 64" h,
 
SS perforated sheets sheet size: 4' × 4',
with round hole,
hole diameter: 3/8".
304
Perforated stainless sheets

hole type: staggered
wire diameter: 20 gauge
sheet size: 36" × 96"
hole size: 1/16"
open area: 40%.

SS 304
perforated sheets hole type: 60 degrees with staggered type.
14 gauge, hole size: 5/8",
with round hole,
hole distance: 13/16",
304L
SS perforated sheets sheet size: 48" × 48"
open area: 22.6%.
hole size: 0.04"
SS 304
round perforated sheets hole type: staggered,
hole diameter: 0.375",
open area: 40%,
0.375" thickness,
hole center: 0.5625",
sheet size: 60" × 96".
SS 304
stainless steel slotted perforated metal panel,
sheet size: 48" × 96".
thickness: 7 gauge
SS 304
Perforated stainless steel sheets hole pattern should be 1/8" holes on 3/16" centers,
1/8" thick,
staggered,
sheet thickness: 8" × 12".
SS 316
Stainless steel perforated sheets hole size: 0.045",
sheet thickness: 18 or 20 gauge.
with round hole,
hole type: staggered,
SS 304
stainless steel perforated sheets metal, 16 gauge hole size: 0.5 mm, SS 316/ 304
Stainless steel perforated sheets, sheet size: 4' × 4'.
hole size: 1/16",
11 gauge,
hole type: staggered pattern,
SS 316
SS perforated sheets 0.188" diameter holes on 0.35"
staggered centers with a 0.75" margin on sides and ends,
24 gauge,
sheet size: 30" × 150.75".
SS 304
Stainless steel perforated sheets hole diameter: 0.5 mm,
pitch: 1.08 mm , 625 holes PSI, sheet size: 600 mm × 2200 mm × 0.3 mm thickness.
SS 304
perforated sheets 5 mm perforation
22 gauge,
sheet size: 12" × 10".
10 mm pitch,
SS 316
SS perforated sheet sheet size: 2000 × 1000,
hole size: 3 mm,
hole distance: 15 mm,
2B or satin finished,
thickness: 2 mm,
hole type: staggered.
304
Perforated sheet with inline square holes.
  • Hole size: 1/2" straight square hole.
  • Sheet size: 4" × 8".
  • Hole space: 1/4" with 1" wide sheet border.
  • Sheet thickness: 14 gauge.
SS 304
Perforated metal sheet.
  • Hole type: staggered.
  • Sheet thickness: 0.075" (gauge: 14).
  • Sheet size: 10" × 10".
  • Hole size: 3/32".
  • Hole distance: 5/32".
SS 316
Stainless steel perforated sheet.
  • Thickness: 1.5 mm.
  • Hole diameter: 0.125.
  • Sheet size: 4' × 8'.
  • Hole distance: 0.1875".
SS 316
perforated sheet
  • Center staggered: 0.125 inches.
  • Hole shape: round.
  • Thickness: 20 gauge.
  • Hole opening: 0.062 inches.
  • 2B finish Polished.
SS T-310
Perforated sheet
  • Thickness: 0.06".
  • Hole size: 1/2".
  • standard 1 m × 2 m.
  • Hole distance: 11/16".
  • Open area: 49%.
SS 304
18 gauge stainless steel perforated sheet
  • Slot length: 1".
  • Hole type: side staggered
  • Hole shape: slot shape with rounded ends.
  • Slot width:0.25".
SS 304
SS perforated sheet, 26 gauge,
sheet size: 30" × 150.75".
0.026" diameter holes on 0.066" staggered centers,
304
Stainless steel 304 perforated sheet with hole distance: 2 mm.
  • Hole diameter: 6 mm,
  • thickness 3 mm.
  • dimensions: 1250 mm × 2500 mm,
  • Hole diameter: 6 mm,
  • thickness 4 mm.
  • dimensions: 1250 mm × 2500 mm,
SS 304
Stainless steel perforated metal for costume furniture project.
  • Openness area: 16% - 20%.
  • Perforations: square, straight layout (not staggered).
  • Sheet size: 80" long × 6" height, 70" long × 6" height,24" long × 6" height, 30" long × 6" height
  • Finish: brushed or satin finish (not polished).
  • Perforation size: 0.125".
SS 304
cold-rolled perforated sheets
  • hole distance: 5 mm
  • round hole diameter: 10 mm
  • sheet thickness: 1.2 mm
  • hole type: staggered
  • sheet size: 1000 × 700 mm, 1000 × 500 mm,1000 × 750 mm.
  • open area: 33%,
AISI 316L

 

get complete details about Perforated Sheet Hole Size Chart and Dimensions

 

Perforated Sheet Hole Size Chart

W - hole diameter
P - hole distance
W (mm) P (mm) Thick × panel size
2 4 2 mm × 1 m × 2 m
2 3.5 1 mm × 1 m × 2 m
3 5 1 mm × 1 m × 2 m
4 6 1 mm × 1 m × 2 m
6 8 1 mm × 1 m × 2 m

 

Perforated Sheet Dimensions
Size 3' X 8' AND 4' X 8'
Application INDUSTRIAL AND DECORATIVE
Material Stainless Steel
Width UPTO 4' WIDTH
Finishing Polished Stainless Steel Perforated Sheet
Hole Diameter 0.5MM TO 40MM
Hole Shape ROUND HOLE , LONG HOLE, SQUARE HOLE
Export to Uk, Ahmedabad, Kolkata, Mumbai, Delhi, Pune, Chennai, Canada, Singapore, Australia, South Africa, Nz, Adelaide, China, Cape Town, Chennai, Melbourne, Ireland, Philippines, Uk, Perth, Uae

 

Know More about MS Perforated Sheet Size Chart and Perforated Plate Thickness Calculation

 

SS Perforated Sheet Rate
Description Price
SS Perforated Sheet, 3mm And 4mm Rs 70 /square feet
Stainless Steel Perforated Sheet Rs 60 /square feet
SS 304 Perforated Sheets, 1-6mm Rs 80 /square feet
SS Perforated Sheet Rs 290 /square feet

 

Perforated Plate Thickness Calculation
Round Hole (R)
Square Hole (C)
Sheet Size Thickness in mm
2m x 1m 1.00
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 2.00
2m x 1m 3.00
2m x 1m 2.00
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 3.00
2m x 1m 1.50
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 3.00
2m x 1m 1.00
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 3.00
2m x 1m 6.00
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 2.00
2m x 1m 1.00
2m x 1m 1.50
2m x 1m 3.00
2m x 1m 5.00
2m x 1m 1.50
2m x 1m 3.00
2m x 1m 2.00
2m x 1m 2.00
2m x 1m 3.00

 

Available Perforated Sheet Grade

 

Our Overseas Sales Office

Indonesia
Iran
Indonesia
Iran
Malaysia
Iraq
Malaysia
Iraq
Singapore
Oman
Singapore
Oman
Saudi Arabia
South Africa
Saudi Arabia
South Africa
Qatar
Nigeria
Qatar
Nigeria
UAE
Kenya
UAE
Kenya
Italy
UK
Italy
UK

Our Valuable Clients

Our Valuable Clients

Third Party Inspection

Third Party Inspection

Quick Enquiry